Technologies at the lowest life cycle cost. Selection of equipment with affordable CAPEX (initial acquisition and installation) and OPEX (operation and maintenance).
Wastewater Treatment for Industrial Engineering Firms
Supporting engineers with innovative technologies that comply with regulation
How to relieve technical studies from a part of private sewage treatment plant design? First, with efficient and cost-effective technologies throughout the life cycle. Also, with product training and BIM models-an increasingly sought-after resource for integrating products into the design of a larger plant.
Compliant water disposal. Our finishing technologies allow discharge into surface water bodies according to the most stringent regional regulations.
A prepared interlocutor. Business consultants and engineering firms can be relieved of part of the design of the sewage treatment plant.
References in industry. A guarantee for enterprises with extremely heterogeneous wastewater qualities on a case-by-case basis.
Reduced resource consumption. The technologies provided for the different treatment steps use the least amount of energy.
Solutions to support water reuse. To extract maximum value from the resource and optimize industrial processes.
The treatment and reuse of industrial water: the challenge of contractors
We are talking about an area that is expanding, thanks in part to an increased awareness among companies with respect to the reuse of a valuable resource: an opportunity that goes beyond simply disposing of it in accordance with regulations. Industrial wastewater treatment is getting a big boost not only from European and national legislation, but also because of companies’ desire to save resources by optimizing processes.
Engineering firms supporting companies must take these elements into account, but not only. Knowing the regulations and selecting ad hoc treatment technologies (according to established parameters) goes hand in hand with typically industrial requirements.
- First of all, industries require the selection of systems for wastewater treatment that consume little: low water and energy use for operations.
- In addition, we know that the often limited space available in operational and production areas is a critical issue: especially in national contexts where the production fabric consists of small or medium-sized companies.
- Thus, we can see how “anxiety” about not incurring fines for poor water management is only one factor in the selection of treatment technologies.
Stringent environmental criteria, reduced consumption, confined space: how to put these different demands together? While staying up-to-date with the latest available technologies.
Tell us your needs
An opportunity for industrial water purification technicians
We are convinced of this: there are some “excellent” water treatment technologies that allow for efficient disposal or reuse of water and, at the same time, contain installation space, resources used and costs over the entire product life cycle (including installation, operation and maintenance).
One of the best examples is pile cloth filters: equipment, now well known to operators of large civil sewage treatment plants, that is becoming increasingly popular in industries as well because of its very high filtration performance. Very few ancillary works required for installation, simple management during the whole life cycle, energy use limited to one operation phase (i.e. backwashing of the cloths): these are the pluses that are also convincing industries and the engineering firms supporting them; which are also increasingly taking into consideration vertical-axis cloth filters: a version with even smaller footprint thanks to their peculiar spatial conformation.
In addition, MITA Water Technologies has long invested in BIM modeling: a resource that engineers know and appreciate for integrating different solutions into the design of a single wastewater treatment plant.
Last but not least. Each industry has ad hoc water treatment needs, as a result of process peculiarities and the different load of pollutants released in process water: BOD/COD, suspended solids, phosphorus, oils and fats. Initial testing through pilot units is therefore a must, prior to selection of the appropriate technology. Even at this stage, MITA Water Technologies is available with its fleet of filtration and biological treatment pilot units with the willingness to train the staff of studios and client companies on the technologies provided.
Our range of wastewater treatment systems
Vertical-Axis Disc Filters PECV VM
An optimal solution for small and medium-sized plants, as much for its compactness as for its simplicity of installation and operation: these are the PECV VM metal tank vertical axis disc filters, for the final separation of suspended solids from civil and industrial wastewater.
Biocombi Monoblock BC 2
Biological oxidation and efficient depth filtration are typical features of the Biocombi Monoblock BC 2, an integrated and compact wastewater treatment system for small communities. It is a suitable solution for low water flow rates while being able to withstand significant load increases at certain times of the day and year.
Mitadaf MD Dissolved Air Flotation Units
Mitadaf is the dissolved air flotation (DAF) system developed by MITA Water Technologies. Its outstanding efficiency in separating solids from liquid and thickening sludge comes from a unique approach that combines the use of microbubbles of air, produced by our Mitasat MS, with a uniform effluent hydrodynamic system.What is your process goal?
Some MITA projects
- Industrial Wastewater
- Suspended Solid Removal
- BOD and COD Removal
- Oil and Grease Removal
- Biorulli® Biodiscs
- Dissolved Air Flotation Units
- Continuous Sand Filters
Water Treatment and Cooling Systems for Vedani Group
Various industrial water treatment technologies as well as cooling technologies: since 1995 MITA Water Technologies has provided multiple solutions, together with its "sister" company MITA Cooling Technologies, for the complete water management of Vedani Group, which has been active in aluminum processing since 1982.
Read more
Biological Rotors for the Chemical Company Icap-Sira
High efficiency, ease of installation, and extreme operation-these are the features that a well-known company in the chemical industry appreciated in choosing Biorulli® biodiscs for the biological oxidation of its wastewater. MITA Water Technologies has been cooperating with this industry since 2006.
Read more
Biorulli® Rotating Biological Contactors for ENI
Customization and long-term trust relationship: these are the two variables that decided the award to MITA Water Technologies of the revamping of the water treatment of an ENI depot in Central Italy. Rotary biological contactors, supplied to the company, are simple but efficient devices for COD removal.
Read moreTools to help you choose
Industrial and civil wastewater treatment technologies
Our support throughout the product life cycle
A sustainable and efficient solution for every industry and need
Resources
Needs of wastewater treatment
Discover the solution for all needsComparing different technologies
Find out all the different technologiesFind out more
All technical articlesOr You Can Choose
Our Newsletter
Sign up for the MITA Water Technologies newsletter: stay up-to-date on systems for municipal and industrial wastewater treatment and filtration.